点击图片查看原图
VERTICAL FREEZE DRYER
ZX-LGJ-18型
■结构小，结构紧凑，操作方便
■冷阱开口大，无内盘
■样品预冻功能，无需低温冰箱
■干燥室要用无色透明一次性注塑成型聚碳材质，防腐蚀，不易碎，不易泄露，可清楚观察样品冻干的全过程
■冷阱和操作台面为全不锈钢，耐腐蚀，易清洁
■国际标准KF真空接口，安装简单可靠，可与多种真空泵连用
■可配充气阀，充干燥惰性气味
The structure is small, the structure is compact, and the operation is convenient.
Big openings of the cold trap, without coil
Sample pre freezing function, no need for low temperature refrigerator
Dry room with colorless and transparent one-time injection molding poly carbon material, anti-corrosion, not fragile, not easy to leak, can clearly observe the whole process of sample freeze dry
Cold trap and operating table for all stainless steel, corrosion resistance, easy to clean
International standard KF vacuum interface, installation is simple and reliable, can be used with a variety of vacuum pumps
Can be equipped with filling valve, filling dry inert odor
技术参数：
■冷凝温度：<-60℃ （空载）
■真空度： <15Pa （配备4升国产防回油真空泵）
■冻干面积：0.18-0.27 m²
■捕水能力：6Kg/24h
■物料盘规格：
ф240mm共4层层间距80mm（散装物料）；ф240mm共6层 层间距50mm（散装物料）可选配；ф220mm共3层（瓶装物料，手动压盖装置）
普通型：特殊设计的不锈钢样品架，样品盘间距可调，层数自由设定；物料干燥盘直径为ф240mm,共四层；可放置物料约1800ml（料厚10mm）
压盖型：三层搁板ф220mm，搁板间距70mm，可放置物料1100ml厚度10mm）；可放置ф22mm西林瓶250只；安培瓶1100只
多歧管冻干瓶：同时最多挂瓶为8个，分为以下4种规格：500ml、250ml、100ml、50ml,可根据需要自由组合，冻干过程中可随时更换冻干瓶，同时冻干几种不同样品，冻干速度快、时间短、操作简单。
■主机尺寸：555L × 555W × 960H（mm)
■电源要求: 220V±10% 50Hz 1800W
Technical parameter:
Condensing temperature: <-60 degrees (no load)
Vacuum degree: <15Pa (equipped with 4 liters of domestic anti back oil vacuum pump)
Freeze dry area: 0.18-0.27 - M
Water capture capacity: 6Kg/24h
Material tray size:
240 Phi a total of 4 layers of pitch 80mm (bulk material); 240 phi 6 layer spacing 50mm (bulk material) can be matching; Phi 220mm a total of 3 layers (of materials in vials, manual capping device)
Common type: stainless steel sample holder with special design, sample plate spacing can be adjusted, free to set the layers; drying disk diameter Phi 240mm, four layers, placed the material about 1800ml (material thickness 10mm)
Gland: three shelves Phi 220mm, shelf spacing 70mm, placing the material 1100ml thickness 10mm); can be placed Phi 22mm vials 250; ampere bottle 1100
Manifold freeze dry bottles: Hang 8 the bottles at most, is divided into the following four kinds of specifications: 500 ml, 250 ml, 100 ml, 50 ml, according to needs, free combination, freeze dry process can be replaced at any time freeze-dried vials, and lyophilized several different samples and freeze drying speed, time is short, the operation is simple.
Host size: 555L * 555W * 960H (mm)
Power requirements: 220V + 10% 1800W 50Hz